Home » Elevator Guide Rail Production Line Collection » T Type Elevator Guide Rail Cold Drawing Machine
T Type Elevator Guide Rail Cold Drawing Machine
- Machine Name: Cold Drawing Machine
- Rated Drawing Length: 12.5M
- Rated Drawing Speed: 12m/min
- Speed Adjusts Range: 0~18m/min
- Rated Drawing Force: 300KN
- Motor Power: 75KW
- Motor Speed: 990rpm
- Pitch: 180mm
Breif Introduction of T Type Elevator Guide Rail Cold Drawing Machine
T Type Elevator Guide Rail Cold Drawing Machine is a kind of mechanical equipment which can stretch ferrous materials (bars, pipes) and non-ferrous materials under normal temperature. The cold drawing machine can also pull out various kinds of special materials such as square steel, hexagons and so on. The cold drawing machine produced by our factory is mainly for deep processing of metal materials. The products have the advantages of high machining precision, high efficiency and semi-automatic machining process. At the same time, it is easy to operate, low fault, simple maintenance and so on. After many years of manufacturing experience, we have accumulated and improved. Our equipment has reached the first-class level in China. It is trusted and praised by users all over the country.
According to the principle of metal plastic deformation, the machine is used for cold drawing of low, medium and high carbon steel and non-ferrous metal bar material pipe under normal temperature. It can draw square steel, hexagon angle steel and seamless steel pipe to reduce its diameter and wall thickness. It can be used in one machine and multiple uses. It is a special mechanical equipment for standard parts, stainless steel pipe factories and other industries.
We are specialized in the production of various series of cold drawing machines, straightening machines (vertical straightening machines, bar straightening machines, steel tube straightening machines), tip rolling machines and their supporting auxiliary equipment, with strong technical force, complete production equipment, skilled technicians, reliable product quality and high cost performance, which has won the favor of many new and old customers. Our factory insists on taking the customer demand as the guidance, developing new products constantly to meet the customer’s diversity requirements, winning the customer’s trust and praise with strong production strength and excellent after-sales service, thus expanding the market and becoming the leader in the same industry.
Specification of Cold Drawing Machine
1. Equipment Overview
A. This equipment is applicable to the drawing (drawing, cold drawing, light drawing and flower drawing) processing equipment of metal tube (bar)
B. Mechanical structure double chain drawing machine Taiwan brand drawing machine technology
2. Working characteristics
After one end of the working mode material is reduced by the indenter (indenter), it is held by human hand and extended into the central frame mold of the drawing machine. After being pneumatically clamped, the chain hooks the chain for drawing. When drawing, the vibration of the machine body is required to be small, the drawing speed is uniform and stable, and the best precision of the finished product after drawing is achieved, so as to achieve the uniform surface, smooth and good quality of the finished product. Generally, the above requirements are achieved after drawing
3. Equipment capacity
A .Stretch form 1 line stretch
B. Tensile force 150kn
C. Tensile speed 0-12m / min
D. Tensile length 9m
E. Core pulling length (propeller length) effective length 8M
F. The maximum outer diameter of plain pipe is ф 100mm, and the wall thickness is 2.5mm
G. Center height 800mm
4. Machine construction
A. Motor and operation panel
(1) Type-45kw1 excitation speed regulating motor, reducer zq-850 1:48.75 1 trolley speed reducing motor 2.2kW 15:1 1 1
(2) Output
(3) Speed
(4) Power supply voltage 380V 50-60Hz
B. Drive part
(1) Frame C360 C160 channel steel and flat steel 30 * 40 welding main frame: C360 * 12000 core pulling frame C360 * 10000
(2) Chain 48b-2 Taiwan chain
(3) Sprocket shaft Ф 125
C. Structure of supporting part
(1) Mould base spherical mould ф 260mm
(2) Die mounting frame steel plate welding structure (cylinder push in rod internal mold)
(3) Feeder cylinder rocker arm rotating material receiving
(4) The feeder is equipped with manual feeding. If it is necessary to automatically feed the rack (roll into the sliding groove, the reduction motor pushes into the core drawing die, the core drawing die automatically rises and penetrates into the material, then it is lowered to the horizontal position, and pushed into the drawing die by the tailstock cylinder), RMB 30000.00 will be added
(5) Drawing trolley pneumatic clamp, clamp arm, pneumatic chain hook, return chain drive belt deceleration
(6) Automatic cutting none
(7) High pressure and high temperature oil pump, internal and external mold pump oil at the same time
Technical Parameter of Cold Drawing Machine
Item | Description | Spec and figure of drawing machine |
|
| LBJ-D30 |
1 | Rated drawing length (m) | 12.5 |
2 | Rated drawing speed (m/min.) | 12 |
| Speed adjusts range (m/min.) | 0~18 |
3 | Rated drawing force (KN) | 300 |
4 | Main drive | |
| Motor type | Y315S-6 |
| Motor power (Kw) | 75 |
| Motor speed (rpm) | 990 |
| Motor brand | Nanjing Kote |
| Type of gear reducer | ZS145 |
| Brand | Jiangsu Taixiang |
5 | Main transmission chain | |
| Pitch (mm) | 180 |
| Chain plate (mm) | 16×120×310 |
| Material of chain | 65Mn |
| Material of chain pin | 40Cr |
6 | Drawing car | |
| Drawing car return motor | Y132S-6 |
| Car return speed (m/min) | 40 |
| Motor power (kw) | 3 |
| Type of clamping and drop-hook | Mechanical |
7 | Automatic mandrel | |
| Motor type | Y132M1-6 |
| Power of motor(kw) | 4 |
| Speed (m/min) | 60 |
8 | Weight of main machine (ton) | About 24 ton |
9 | Price of raw material stacking table and finished product collecting stack (USD) | 7,500.00 |
10 | Weight of Item 10 (ton) | About 3 ton |
11 | Overall length: more than 40m; longest single piece: 8m |
Model | Rated drawing force(T) | Maximum clamp diameter(mm) | Maximum reduction rate(%) | Main chain pitch(p) | Main chain bar size (height × thickness) | Trolley return speed(m/min) | Main motor power(KW) | Reducer model |
LW5 | 5 | Ф25 | 20% | 78.18 | 45×10 | 55 | 11 | ZQ500 |
LW10 | 10 | Ф32 | 25% | 103.2 | 60×13 | 55 | 30 | ZQ750 |
LW15 | 15 | Ф40 | 25% | 160 | 100×10 | 60 | 45 | ZQ850 |
LW20 | 20 | Ф45 | 25% | 180 | 120×16 | 60 | 55 | ZQ1000 |
LW30 | 30 | Ф50 | 20% | 180 | 120×18 | 60 | 75 | ZQ1250 |
LW45 | 45 | Ф60 | 20% | 220 | 140×18 | 60 | 90 | ZQ1450 |
LW60 | 60 | Ф80 | 20% | 250 | 150×20 | 55 | 110 | ZQ1650 |
LW80 | 80 | Ф90 | 20% | 260 | 150×25 | 55 | 132 | QJS-D-710 |
LW100 | 100 | Ф100 | 18% | 300 | 180×30 | 50 | 132 | QJS-D-800 |
LW120 | 120 | Ф120 | 18% | 320 | 200×30 | 50 | 160 | QJS-D-900 |
LW150 | 150 | Ф130 | 18% | 350 | 210×32 | 50 | 200 | QJS-D-1000 |
GET ONE-ON-ONE SERVICE
Free of charge to provide you with technical advisory services. Provide product samples, business profiles, credit certificates and other information. I invite customers to visit the company’s product design, product manufacturing process, product prototype, product testing facilities and quality management system