V Clamp Roll Forming Machine
- Usage: Omega V Band Clamp
- Diameter: 55~800mm
- Thickness Of Coil: 0.8mm To 3mm
- Width Of Coil: 30mm ~ 120mm
- Material Of Rollers: Cr12Mov
- Stations: 8 Stations
- Motor: Servo Motor 11KW
V Clamp Roll Forming Machine Technical Parameters and Description
1、Machine Parameters
No | Items | Technical Requirements |
1 | Production Process
| De-coiler — Crop —Forming — Rolling Head |
2 | Floor Area | 8×2.5×2（L×W×H）M |
3 | Feeding Direction | From Left to Right |
4 | Voltage | 415V，50Hz，3 Phase |
5 | Air Supply | Flow Rate:0.5m³/min; Pressure: 0-0.7MPa |
6 | Hydraulic Fluid | 46# |
7 | Gear Oil | 150# |
8 | Material of Strip | Stainless Steel |
9 | Width of Strip | ≤80mm |
10 | Thickness of Strip | ≤1mm |
11 | Speed | 10 components per minute |
12 | Length Tolerance | ±0.5mm |
13 | Total Power | Around 10 KW |
2． Electric Elements Brand
No | Items | Brand | Model |
1 | PLC | Mitsubishi | |
2 | HMI | MCGH | |
3 | Electric Elements | ||
4 | Bearing | NSK,NTN | |
5 | Servo Motor | Yaskawa | |
7 | Safety Relays | PILZ | |
8 | Magnetic Interlock Switches | Allan Bradley | 440K-T11090 |
9 | Digital Position Display | SIKO | |
10 | Hydraulic system | HUADE |
3、Machine Parameters
Decoiler with Pressing Arm
Guide Device
Accurate introduction of the first forming wheel, with digital display, detection of head and tail of coils.
Cropping and Typing Device
Cut off the fixed length of materials and print the trademark of produc
Roll Forming Machine
Quick Change Device
Guide Device
The lubrication system for segment forming will be self-contained within the machine. The excess lubrication from the forming process will be re-circulated, filtered and re-used.
4、Control System
The safety protection device mainly aims at two parts of protection, one is the protection of the host, the other is the use of aluminum profiles and transparent plexiglass, electrical control and other aspects of the host’s safety protection; the other is the automatic material rack and leveling position protection device, which uses aluminum profiles and wire mesh to protect the equipment, but only one exit.
GET ONE-ON-ONE SERVICE
Free of charge to provide you with technical advisory services. Provide product samples, business profiles, credit certificates and other information. I invite customers to visit the company’s product design, product manufacturing process, product prototype, product testing facilities and quality management system
